Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing

Features:
– Plug and play design, easy to use
– Dual relay output, be able to connect with refrigeration and heating equipment at the same time
– Support reading with Centigrade or Fahrenheit unit
– Maximum output load: 1100W(110V)
– Dual display window, be able to display measured temperature and set temperature at the same time
– Temperature calibration
– Compressor delay protection for refrigeration control
– High and low temperature alarms are available
– Over-temperature and sensor fault alarm
– Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change

Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

Note:
This listing sensor’s probe dimension is 50mm x 6mm.
If you want 12″ probe sensor, you can search on Amazon and buy one by ASIN: B01A6DIPFM or ASIN: B01A51OLR6.

[Convenient Design] Plug and play, easy to use.
[Reading Mode] Support reading with Centigrade or Fahrenheit unit.
[Safe] Maximum output load: 1100W(110V).
[Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
[Dual Display Window] Be able to display measured temperature and set temperature at the same time.