Inkbird 12 periods Timer Stage ITC-310T-B Digital Heating & Cooling Pre-wired Temperature Controller For Home brewing, Greenhouse, Heating mat

ITC-310TB is a dual-relay outlet thermostat with programmable timer function, which can be set to automatically control 12 periods timer stage with different temperatures.
The ITC-310TB is mainly used to control temperature during fermentation process of beer and wine brewing. It also widely used in home brewing, aquarium, pet breeding, hatching.
What’s more, it’s multipurpose for you to use in boiler temperature control, geothermal temperature control, heating pump constant temperature cycle, and strain culture fermentation.
(Seed sprouting, electric heating, electric oven, over-temperature protection and automatic temperature control system of all kinds of electrical equipment, etc.)

Specification:
Temperature Control Range : -50~120°C /-58~248°F
Temperature Resolution : 0.1°C / 0.1°F
Measuring Accuracy : ±1°C (-50~ 70°C) / ±1°F (-58~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Timing Accuracy: 24 hours±1.7s
Periods of Time Max: 12 periods
Cycle Setting: 1-999 times cycle, or 00 infinite cycle
Input Power: 100 ~240VAC, 50Hz/60Hz
Control Output Current: Max.10A
Power: Max. 1200W (110V)/ 2200W (220V)
Alarm: High/ Low Limit setting Alarm
Sensor Type: NTC Sensor (including)
Sensor Length: 2m / 6.56ft
Relay Output: Cooling (10A,100-240VAC)
Heating (10A,100-240VAC)
Input Power Cable Length: 1.5m ( 5ft )
Dimension: 140x68x33 mm(body)
Operating Ambient Temperature: -30~ 75°C / -22~ 167°F
Storage Condition Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No freeze or moisture condensation)
Warranty: 1 Year

Package included:
1 x ITC-310TB Thermostat with Timer
1 x Manual

• [Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
• [Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
• [Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
• [Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
• [Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.